Weedcheck Ultra

• A high performance weed control membrane which will stop rhizome growth from underneath.
• No need for chemicals when installing
• Water and feed passes through to the soil below.
• Low maintenance gardening.
• Decorative aggregates will not be lost into soil

• Aggregate Areas
• Pedestrian Scree areas
• Flower Beds
• Under Decking with Mulch
• Shrub Beds
• Vegetable Beds
• Vegetable Protection
• Lining Plant Containers
• Between Crocks and Compost
• Under Artificial Grass

1. For aggregate & paved areas simply strim all vegetation to ground level remove vegetation and ensure that there are no sharp objects which could penetrate the Weedcheck Ultra. Should bulbs be present they are best removed at this stage.

2. For garden areas prepare the soil removing any visible weeds and then add plant feed to the area.

3. Lay out the Weedcheck Ultra over the area and secure at the edges. Using a spade spit down 150mm vertically and tuck the Weedcheck Ultra into the vertical spit.

4. Should joins be necessary then the recommended overlap is 100mm. Pins can be used but best to use the mulch to keep in place. Use heavy stones temporarily whils wt orking.

5. Place your plants on top and arrange ready for planting.

6. Cut a cross, open up and remove soil. Water and place plant in the hole, firm in and replace the Weedcheck Ultra ensuring that there is no soil left on top of the membrane.

7. To ensure the cuts are covered just cut a collar from the Weedcheck Ultra with 1 slit and use to cover the cross cuts. Example of collar.

8. Cover the bed with your preferred mulch approximately 40mm for aggregates or coconut mulch and 50/60mm for traditional bark mulch.

9. With Artificial Grass Weedcheck Ultra goes directly under the Artificial grass and on top of the compacted 10mm down or sand.

10. Ensure Weedcheck Ultra is covered with a mulch within 24 hours of laying