• Provides a weathertight junction between differing roof finishes

– Flexible and Lightweight

– UV resistant

– Mortar-free

• Colour: Grey
• Glass Reinforced Polyester
• UV stable
• Packed in 10’s

• Expose party wall by removing slates/tiles on both sides and cut the battens back so the party wall is located and will be central both sides.
• Place new underlay over party wall and ensure this underlay is fit under pre-existing battens.
• The Dry fix Bonding Gutter must be fit under adjoining battens and placed centrally over party wall. Ensuring that adjoining roof profiles from both properties fit central to the upstand.
• Allow 160mm overlap between lengths of Bonding gutter. And at the termination point you must ensure 50mm overlap to achieve effective water runoff into gutter.
• Nail in place with minimum of 20mm galvanised clout nail
• Tiles must be butted up to central upstand, and securely fixed as per tile manufacturer’s instructions and regulations.

Installing Firebreak

• Roofing Battens must be cut back and a gap of 100mm must be left across the party wall
• A bed of mortar is to be applied in the gap from Eaves to Ridge along the gap and onto the party wall.
• Once mortar is dry, fit bonding gutter as per above instructions.