Aqua GRP Resin when used with Aqua GRP Topcoat provides a leak free cost effective flat roofing system.
The system is cold applied and does not require any use of flame torches making installation safer.
When competently installed the Aqua GRP range creates a seamless frost proof and strong flat roof of any shape and size.
Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims. Trim adhesives and chopped strand matting.
Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims. Trim adhesives and chopped strand matting.
A170 Small Drip
Flat roof edge above gutter.
80mm x 70mm
A200 Standard Drip
Flat roof edge above gutter.
80mm x 90mm
A250 Large Drip
Flat roof edge above gutter.
80mm x 140mm
B230 Raised Edge
Fitted to prevent water run off.
100mm x 105mm
B260 Raised Edge
Fitted to prevent water run off.
100mm x 130mm
B300 Raised Edge
Fitted to prevent water run off.
100mm x 180mm
D260 Angle Fillet
Buts up against up-stand wall.
110mm x 60mm 75mm
D300 Angle Fillet
Buts up against up-stand wall.
185mm x 60mm x 85mm
ER35/40 Ridge Roll
Simulates lead roll.
65mm x 90mm
E280 Expansion
For use on large areas.
65mm x 185mm
F300 Flat Sheet
300mm
AT195 External
75mm x 120mm
AT195 Internal
65mm x 185mm
C100 Simulated lead
Replaces traditional lead flashing.
30mm x 100mm
C150 long leg simulated lead
Replaces traditional lead flashing.
30mm x 150km
C1 Universal External Corner
C4 Universal Internal Corner
GRP Range of Tools
Downloads
Data Sheets
Material Safety Data Sheets
Installation Guides
Full Range of Trims
Estimating Quantities Guide
GRP Materials Calculator
Please note Hardener Quantities will vary depending on weather conditions.
Installation Video
Sentinel GRP Installation Guide
Our Sentinel GRP installation guide is a comprehensive step by step booklet including our full range of trims and an easy to follow estimating materials guide.
