| Description | Rise |
|---|---|
|
Gas Barrier Internal 90° Corner |
75mm, 150mm, 225mm |
|
Gas Barrier External 90° Corner |
75mm, 150mm, 225mm |
|
Preformed Perimeter T/Frame Linear Trays |
75mm, 150mm, 225mm |
Gas Barrier External 90° Corner
Designed to ease installation by reducing the amount of detailing and taping required, preformed to simply cap off cavity wall external corners, manufactured from gas resistant DPC, standard cloaks available from stock.
Gas Barrier Internal 90° Corner
Designed to ease installation by reducing the amount of detailing and taping required, preformed to simply cap off cavity wall internal corners, manufactured from gas resistant DPC, standard cloaks available from stock.
Preformed Perimeter T/Frame Linear trays - 2m
Preformed from rigid material to allow perimeter protection for early installation to then join gas barrier membrane at a later stage, designed to cap over foundation block below sole plate to allow ventilated airspace. Manufactured from rigid HDPE.
Gas Barrier Step Door Cloak Pair
(LH Illustrated) Designed to ease the installation and preformed to cap off cavity wall at reveal openings, manufactured from gas resistant DPC, standard cloaks available from stock.
Gas Barrier System Solutions
The Rhinoplast gas barrier system solutions service has been established to provide a complete design service to overcome many problems associated with construction on land associated with a range of hazardous gasses. Principal can offer a full technical support to recommend and design products that can simplify, improve, and accelerate installations to meet site specific gas regimes.
We offer a full plot and site-specific schedule service to ensure full site compliance and all components can be either standard issue or uniquely CAD designed with technical supported on-site visits.
Pre-Formed Corners & Ancillaries
Suitable for all perimeter wall corner junctions to overcome the need for cuts and folds to eliminate gaps in the gas membrane. Design options available to protect either floor slab or cavity side construction. Corners can be supplied to any angle, height, and width in flat or cavity tray profiles
