Skip to content

Heavy Duty Joist Hangers ‘S’ Type

Heavy duty joist hangers for timber to brick applications are manufactured from 2.5mm thick mild steel and galvanised after. Safe working loads depend upon the strength of the supporting brick or block work. New masonry should be allowed to mature before load is applied. It is recommended that at least 450mm of masonry should be above the flange of the hanger, and the backplate of the hanger should be flat against the vertical masonry.

 

Category:

N.B Actual depth of hanger will be 10mm less than stated to allow the joist to be notched out.

Stock range as follows:

Joist depth: 100mm, 125mm, 150mm, 175mm, 200mm, 225mm and 250mm

Type ‘R’ (Return type hangers)

Type ‘ST’ (Stirrup type hangers)

Type ‘FF’ (Face fix type hangers)

When ordering type ‘R’ or type ‘ST’ hangers, please specify width of brick or blockwork to be straddled.

Other sizes of hangers can be manufactured to order, please contact sales office for details.

Description Size Unit
Heavy Duty Timber to Timber Hanger
38mm
each
Heavy Duty Timber to Timber Hanger
50mm
each
Heavy Duty Timber to Timber Hanger
63mm
each
Heavy Duty Timber to Timber Hanger
75mm
each
Heavy Duty Timber to Timber Hanger
100mm
each
Heavy Duty Timber to Timber Hanger
125mm
each
Heavy Duty Timber to Timber Hanger
150mm
each

Downloads

MENU