The Flexi-load range of polymeric DPCs are a well-established range of damp proof courses and accessories, designed to meet the increasing demands of the construction market. They are tough and flexible and perform well under high compressive loads.
- Supplied on 20m rolls in width ranges from 100mm to 1000mm
- To be used as a flexible cavity tray system
- Site formed to manage the downward passage of water.
- To prevent the passage of moisture from the ground rising into the fabric of the building.
- Can be used in heavy loading situations, such as in multi storey buildings
- Suitable for DPC cavity tray applications at ground level
- Radon DPC barrier
- Contains no hazardous pitch or bitumen
- Will not extrude under load
- Outstanding puncture and tear resistance
- Embossed to increase adhesion and reduce slippage
- Flexible at low temperatures
- Available in a range of standard widths
- CE Marked to EN 14909
- Radon resistant damp proof course
- Preformed Units available
Colour – Black
Thickness – 0.8mm
Roll sizes – various widths x 20mtr
CE Marked to EN 14909
Radon Permeability (SP Method 3873) 4.8·10¯¹² m²/s
| Description | Roll width | Roll length | Thickness | m2 |
|---|---|---|---|---|
|
Flexi-load high performance DPC |
100mm |
20m |
0.8mm |
2 |
|
Flexi-load high performance DPC |
112mm |
20m |
0.8mm |
2.24 |
|
Flexi-load high performance DPC |
150mm |
20m |
0.8mm |
3 |
|
Flexi-load high performance DPC |
225mm |
20m |
0.8mm |
4.5 |
|
Flexi-load high performance DPC |
300mm |
20m |
0.8mm |
6 |
|
Flexi-load high performance DPC |
337.5mm |
20m |
0.8mm |
6.75 |
|
Flexi-load high performance DPC |
450mm |
20m |
0.8mm |
9 |
|
Flexi-load high performance DPC |
600mm |
20m |
0.8mm |
12 |
|
Flexi-load high performance DPC |
900mm |
20m |
0.8mm |
18 |
|
Flexi-load high performance DPC |
1000mm |
20m |
0.8mm |
20 |
Pre-formed Units Available
Pre-formed corner units – for use to return corners for full perimeter cavity tray.
Pre-formed Telescopic underfloor vent collars – To allow for sealing around ventilation ducts.
Pre-formed stop end units – for capping off the ends of a cavity tray run and at column projections
